三关节机器人的神经网络补偿自适应控制器设计

三关节机器人广泛用于工业生产、轮式或履带式排爆机器人,为了补偿由于机器人结构参数、作业环境干扰等不确定性因素造成的机器人动力学模型的不确定性,将机器人动力学模型分解为名义模型和误差模型两部分,其误差模型采用RBF神经网络进行补偿,得到其估计信息,神经网络的输出权值根据Lyapunov稳定性理论采用自适应算法进行调整。所设计的神经网络补偿自适应控制器解决了不确定性机器人动力学系统控制器设计的不确定性问题,同时,通过定义Lyapunov函数,证明了控制器能渐近、稳定地跟踪期望轨迹。机器人的3个关节在控制器的作用下,约在5 s时达到期望轨迹,神经网络约在5 s时逼近机器人动力学模型的误差模型,实验结果表明了机器人关节对期望轨迹具有良好的轨迹跟踪性能。     

Investigation on the spatial distribution characteristics of behind-armor debris formed by the perforation of EFP through steel target

The behind-armor debris (BAD) formed by the perforation of an EFP is the main damage factor for the secondary destruction to the behind-armor components. Aiming at investigating the BAD caused by EFP, flash X-ray radiography combined with an experimental witness plate test method was used, and the FEM-SPH adaptive conversion algorithm in LS-DYNA software was employed to model the perforation process. The simulation results of the debris cloud shape and number of debris were in good agreement with the flash X-ray radiographs and perforated holes on the witness plate, respectively. Three-dimensional numerical simulations of EFP's penetration under various impact conditions were conducted. The results show that, an ellipsoidal debris cloud, with the major-to-minor axis radio (a/b) smaller than that caused by shaped charge jets, was formed behind the target. With the increase of target thickness (h) and decrease of impact velocity (v₀) and obliquity (θ), the value of a/b decreases. The number of debris ejected from target is significantly higher than that from EFP. Based on the statistical analysis of the spatial distribution of the BAD, An engineering calculation model was established considering the influence of h, v₀ and θ. The model can with reasonable accuracy predict the quantity and velocity distribution characteristics of BAD formed by EFP.     

共址调频和调幅系统干扰机理及干扰抑制需求分析

以调幅和调频电台为研究对象,对共平台接收电台前端低噪声放大器的非线性进行精确建模,分别对调幅电台和调频电台的干扰抑制需求进行解析,并通过数值仿真对解析模型进行验证。结果表明:所提解析模型较现有模型更为准确;当有用信号功率、噪声功率和干扰功率相同时,调幅通信系统的干扰抑制需求高于调频通信系统。     

考虑禁飞区的高超声速飞行器再入跟踪控制

为确立高超声速飞行器再入精确模型,参考NASA的研究数据对动力学方程中的气动参数进行拟合。基于飞行器结构的相关性质及战略应用背景,加入热流密度、动压、过载和禁飞区等参考约束的限制,融合成强非线性、复杂耦合的最优控制问题。采用改进自适应伪谱法求解模型所构建的微分方程组,通过设置自适应网格细化与配点,使单位时间内状态变量和控制变量波动过大的时间区间被进一步细划,并利用SNOPT求解器解算出符合条件的最优轨迹。设计闭环控制器,实现对最优轨迹的姿态变化的跟踪,测试系统的性能并进行评估。仿真结果表明:整个再入过程中,飞行器速度下降过程偏于平稳,再入轨迹可以满足约束条件,在避开禁飞区的同时取得最大横向航程;三通道角速度收敛可控,对姿态的跟踪较理想,控制器基本可以实现精确调姿。     

基于圆锥扫描的卫星信号强度闭环控制方法

在车载卫星通讯系统中,常利用高精度速率陀螺仪作为稳定反馈器件构成天线稳定伺服控制系统,以抑制车体运动对卫星通讯天线的扰动.但由于陀螺仪自身存在的漂移特性,使得仅依靠速度闭环无法满足车载卫星"动中通"的要求.因此,采用圆锥扫描方法获取天线在空间扫过位置的卫星信号强度,再与伺服系统构成信号强度闭环,从而实现天线空间指向的稳定.介绍一种卫星信号强度闭环控制方法.该方法不仅能够很好地补偿由于陀螺飘移引起的系统稳定误差,而且对由其他原因引起的稳定误差和远距离移动引起的跟踪误差具有同样的补偿作用,达到有效锁定和高精度跟踪通信卫星的目的.     

A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise,minimum mean square variance criterion and least mean square adaptive filter

Underwater acoustic signal processing is one of the research hotspots in underwater acoustics. Noise reduction of underwater acoustic signals is the key to underwater acoustic signal processing. Owing to the complexity of marine environment and the particularity of underwater acoustic channel, noise reduction of underwater acoustic signals has always been a difficult challenge in the field of underwater acoustic signal processing. In order to solve the dilemma, we proposed a novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN), minimum mean square variance criterion (MMSVC) and least mean square adaptive filter (LMSAF). This noise reduction technique, named CEEMDAN-MMSVC-LMSAF, has three main advantages: (i) as an improved algorithm of empirical mode decomposition (EMD) and ensemble EMD (EEMD), CEEMDAN can better suppress mode mixing, and can avoid selecting the number of decomposition in variational mode decomposition (VMD); (ii) MMSVC can identify noisy intrinsic mode function (IMF), and can avoid selecting thresholds of different permutation entropies; (iii) for noise reduction of noisy IMFs, LMSAF overcomes the selection of decomposition number and basis function for wavelet noise reduction. Firstly, CEEMDAN decomposes the original signal into IMFs, which can be divided into noisy IMFs and real IMFs. Then, MMSVC and LMSAF are used to detect identify noisy IMFs and remove noise components from noisy IMFs. Finally, both denoised noisy IMFs and real IMFs are reconstructed and the final denoised signal is obtained. Compared with other noise reduction techniques, the validity of CEEMDAN-MMSVC-LMSAF can be proved by the analysis of simulation signals and real underwater acoustic signals, which has the better noise reduction effect and has practical application value. CEEMDAN-MMSVC-LMSAF also provides a reliable basis for the detection, feature extraction, classification and recognition of underwater acoustic signals.     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

辐射叶加载的短波宽带鞭状天线优化设计

提出一款具有多层辐射叶结构的新型鞭状天线,在10 m鞭状天线体上设置不同的辐射叶层数、半径、长度、分支数、仰角及其分布情况,研究其对天线辐射性能的影响,综合考虑选择一套最合适的辐射叶结构,并为天线进行双加载和宽带匹配网络的算法优化。仿真结果表明,与现有的普通宽带鞭状天线相比,增益和效率得到了普遍提高,在低频段增益最高提高了3 dB,效率最高提高了5%;在高频段增益最高提高了5 dB,效率最高提高了35%,方向图上翘也得到了一定的抑制,为改善现有的宽带鞭状天线提供一种新的结构设计方法。     

一种基于口径耦合的S波段小型圆极化微带天线的设计

圆极化微带天线以其低轮廓、可共型、易集成、隐蔽性好等优点,在军事应用上受到人们越来越多的重视。文章从实际应用的角度出发,设计了一种基于口径耦合的S波段单馈小型圆极化微带天线,该天线馈电简单,阻抗匹配实现容易,适于圆极化设计及小型化设计。     

高频雷达多波束最优天线方向图综合

在高频雷达中 ,多个部分重叠的波束被用来形成对预定空域的覆盖 ,而射频干扰和期望信号的空间结构之间的差异以及接收天线阵列的空间多样性则被用来抑制干扰以提高高频雷达的整体工作性能。然而如何在实时地形成多波束的同时有效地抑制射频干扰仍然是高频雷达一个急待解决的问题。基于最优天线方向图综合方法 ,通过主瓣形状保持和干扰抑制之间的合理折衷进一步提出了多波束形成算法。仿真结果表明该算法可以快速、灵活地形成多个波束来覆盖预定的空域 ,同时最大限度地抑制射频干扰 ,从而极大地提高了高频雷达的工作性能